IMPLEMENTATION OF AN AUTOMATED PART SORTING SYSTEM USING A SIEMENS S7-1200 PLC ON A MODULAR DIDACTIC WORKBENCH

Authors

DOI:

https://doi.org/10.18624/e-tech.v19i1.1497

Keywords:

automated sorting; didactic workbench; industrial automation; industrial sensors; sequential control; Siemens S7-1200 PLC.

Abstract

This article describes the implementation and evaluation of an automated system for sorting parts based on multiple criteria on a modular didactic workbench. The system uses a Siemens SIMATIC S7-1200 programmable logic controller (PLC), CPU 1214C DC/DC/DC, integrated with photoelectric, inductive, and capacitive sensors, three double-acting pneumatic cylinders, and a DC-powered conveyor belt. The program was developed in Ladder language using TIA Portal V17, with a sequential organization of the detection, classification, and actuator activation stages. The study describes the physical architecture of the workbench, the mapping of inputs and outputs, the implemented control logic, and the results obtained in educational tests. A total of 90 test cycles were conducted using metal and non-metal parts of varying heights in alternating sequences, resulting in 90 correct separations under the evaluated conditions. The results indicate that the test bench is suitable for the practical teaching of industrial sensors, ladder logic programming, pneumatics, and the integration of hardware and control software. The study also highlights limitations associated with the use of fixed timing in systems with continuous feeding, suggesting the need for future studies with actuation strategies based on the actual position of the part on the conveyor belt.

Downloads

Download data is not yet available.

Author Biographies

Tairo Collyer, SENAI AM

He holds a degree in Production Engineering from the Federal University of Amazonas, an MBA in Lean Management & Industry 4.0 from ITEAM, a postgraduate degree in Industrial Engineering and Management from the Federal University of Amazonas, and a master's degree in Production Engineering from the Federal University of Amazonas. He is also pursuing technical training in Industrial Automation at SENAI. He works in engineering, industrial maintenance, automation, continuous improvement, and production process management.

Ryan Araújo Nascimento, SENAI - Departamento Regional do Amazonas

He has completed high school and is currently pursuing a Technical Program in Industrial Automation at SENAI-AM. He works as a young apprentice in the administrative field and is interested in industrial automation, technology, production processes, and professional development.

Rosumiro Trindade Junior, SENAI - Departamento Regional do Amazonas

He holds a degree in Electrical Technology from the Amazonas State University (2004) and a degree from the Special Pedagogical Training Program for Professional Education Instructors at the University of Southern Santa Catarina (2011). He works as Instructor II at SENAI - Amazonas Regional Department, with experience in PLCs, microcontrollers, digital electronics, analog electronics, industrial electronics, frequency inverters, and electricity.

Published

2026-11-14

How to Cite

Collyer, T., Araújo Nascimento, R., & Trindade Junior, R. (2026). IMPLEMENTATION OF AN AUTOMATED PART SORTING SYSTEM USING A SIEMENS S7-1200 PLC ON A MODULAR DIDACTIC WORKBENCH. Revista E-TECH: Tecnologias Para Competitividade Industrial - ISSN - 1983-1838, 19(1). https://doi.org/10.18624/e-tech.v19i1.1497